Why is my KITO ER010S Chain Hoists leaking oil?
An oil leak in your KITO Chain Hoists can be attributed to: * A missing oil plug. * A loose fitting or oil plug. * A missing plug packing. * Worn or deteriorated oil packing. To resolve this, attach the normal oil plug, fasten the plug tightly, attach normal packing, or replace with new packing.
What to do if my KITO ER010S electric shock?
If you experience an electric shock from your KITO Chain Hoists, it may be due to improper grounding or accumulated foreign matter/moisture on electrical parts. Ground the equipment according to local laws to prevent electric shocks.
How to fix brake slips in KITO Chain Hoists?
If the brake slips in your KITO Chain Hoists, it is likely due to abrasion of the motor brake. You should check and repair the motor brake.
What to do if KITO Chain Hoists motor hums and does not rotate?
If the motor of your KITO Chain Hoists hums but does not rotate, it indicates a reversed connection. Stop operation immediately.
Summary of safety precautions for operating, maintaining, and inspecting the hoist.
Detailed safety guidelines covering before use, during operation, after operation, maintenance, and other considerations.
Procedures for checking, changing, and installing wiring and power supply cables, including diagrams and capacity tables.
Guidelines for ensuring a safe working environment, including operator awareness and workplace checks.
General| Model | ER010S |
|---|---|
| Type | Electric Chain Hoist |
| Load Capacity | 1 ton |
| Chain Fall | 1 |
| Lift Height | 3 m |
| Power Supply | 3-phase 400V |
To Next Page
