Why is my KITO ER030L leaking oil?
An oil leak in your KITO Chain Hoists can be attributed to: * A missing oil plug. * A loose fitting or oil plug. * A missing plug packing. * Worn or deteriorated oil packing. To resolve this, attach the normal oil plug, fasten the plug tightly, attach normal packing, or replace with new packing.
What to do if my KITO Chain Hoists electric shock?
If you experience an electric shock from your KITO Chain Hoists, it may be due to improper grounding or accumulated foreign matter/moisture on electrical parts. Ground the equipment according to local laws to prevent electric shocks.
How to fix brake slips in KITO Chain Hoists?
If the brake slips in your KITO Chain Hoists, it is likely due to abrasion of the motor brake. You should check and repair the motor brake.
What to do if KITO ER030L motor hums and does not rotate?
If the motor of your KITO Chain Hoists hums but does not rotate, it indicates a reversed connection. Stop operation immediately.
General| Brand | KITO |
|---|---|
| Model | ER030L |
| Category | Chain Hoists |
| Language | English |
Explains hazard symbols (DANGER, WARNING, CAUTION) and capacity units (kg/t).
Describes the hoist's design for vertical, lowering, and horizontal load carrying.
Provides a brief overview of critical safety warnings for heavy loads and proper usage.
Details specific safety guidelines for pre-operation, operation, and post-operation.
Outlines safety procedures to be followed after completing hoist operations.
Emphasizes safety guidelines to be observed during maintenance tasks.
Advises consulting the manufacturer for usage in specific environmental conditions.
Lists technical parameters such as operating temperature, humidity, power supply, and chain dimensions.
Explains hoist durability ratings based on FEM and ISO standards and their impact on lifespan.
Highlights unique components and functionalities like the motor brake, limit switch, and friction clutch.
Details the procedure for assembling the hoist when using a hook suspension.
Provides instructions for assembling the hoist and integrating it with a motorized trolley.
Describes the process of securely attaching the hoist's trolley to the overhead traversing rail.
Guides users through the electrical connection and setup of the hoist's power supply.
Outlines the steps for conducting functional tests and safety checks after installation.
Restates the hoist's primary function for lifting and moving loads.
Emphasizes maintaining a secure and clear workspace for safe hoist usage.
Describes the different models of KITO ER series electric chain hoists.
Details the operational aspects of hoists combined with motorized trolley systems.
Provides guidance on the schedule and methods for lubricating the gear case.
Explains the importance and frequency of lubricating the load chain.
Offers a step-by-step guide for replacing the hoist's load chain.
Classifies and details the procedures for various hoist inspection types.
Stresses the need for maintaining proper documentation of all inspections performed.
Provides detailed instructions for conducting daily visual inspections of hoist components.
To Next Page
