2
ASSEMBLING
:MOVE MINI
CODING
:MOVE MINI
1. ASSEMBLING THE PCB
7. ATTACHING ELECTRONICS
4. TESTING THE SERVOS
5. CALIBRATING THE SERVOS
6. ASSEMBLING THE CHASSIS
3. BUILDING THE WHEELS
9. DRAW A SHAPE USING JAVASCRIPT
TROUBLESHOOTING
10. GO ONLINE!
SUPPORT FOR
:MOVE MINI
CONTENTS
INTRODUCTION TO THE :MOVE MINI
SUPPLIED WITH THIS KIT
GETTING CONNECTED
THE BBC micro:bit SOFTWARE
PROGRAMMING THE BBC micro:bit
2
3
6
5
4
7
8
13
14
17
22
18
24
26
30
30
31
2. FLASH THE ZIP LEDs
The Kitronik :MOVE mini for the BBC micro:bit provides an introduction
to robotics. The :MOVE mini is a 2 wheeled robot, suitable for both remote
control and autonomous operation. A range of add-on boards can expand
the capabilities to include more advanced functionality. The included :MOVE
Servo:Lite board can also be used in conjunction with a BBC micro:bit to build
other movement based projects.
Kitronik have created custom blocks for the MakeCode coding environment,
these make it ultra simple to code your :MOVE mini. Give it a try by adding
the ‘Servo:Lite’ blocks from the Extensions tab in MakeCode!
8. CODE :MOVE MINI TO MOVE
:MOVE MINI PIN OUT
To Next Page
Loading...