Kitronik BBC Micro Bit move Mini Mk2 - Troubleshooting and Resources

30
CODE EXAMPLES
GO ONLINE!
10
- GROUND
- 3V
- P2 LEFT SERVO OUTPUT
- P1 RIGHT SERVO OUTPUT
- P0 ZIP LED OUTPUT
:MOVE mini PIN OUT
- Use your phone as a remote control!
- Use a second micro:bit as a remote control!
- Output to a third servo, such as a bulldozer!
- Personalise the :MOVE mini with extra ZIP LED strips!
For additional tutorials, add-on packs & resources, scan the QR
Code or visit: kitronik.co.uk/moveminimk2
Kitronik have created custom blocks for the MakeCode coding
environment, these make it ultra simple to code your :MOVE
mini. Give it a try by adding the ‘Servo:Lite’ blocks from the
Extensions tab in MakeCode!