Kitvision ESCAPE 4KW - Using Wi-Fi; Downloading the Wi-Fi App; Pairing the camera to your device

20 21
Using Wi-Fi
With the Escape 4KW’s built-in Wi-Fi, you can use your smart
deviceasacameraremote,viewnder,anddownloadlesto
your phone.
Downloading the Wi-Fi App
• The Wi-Fi app is available to download for free at the Apple App
Store™ and Google Play Store™.
•Androidusers:EntertheGooglePlaystore™,searchfor“Ez
iCam”, download and install, following this user manual to
connect the Wi-Fi and operate.
•iPhoneusers:EntertheAppleAppstore™,searchfor“Ez
iCam”, download and install, following this user manual to
connect the Wi-Fi and operate.
Pairing the camera to your device
1. Turn on the camera and press the Down/Wi-Fi Button (13).
2. The built-in LCD (10) will show the message ‘Waiting for Wi-Fi
connection…’.
3. Search for a Wi-Fi hotspot on your smart phone/tablet, select
the“ICAM-Escape4KW”networkandyouwillbeprompted
forapassword;enter“1234567890”toproceed.
4. Once connected the camera’s built-in LCD (10) will enter sleep
mode. If a camera button is pressed whilst the camera is in
Wi-Fi mode, the camera will disconnect from your device.
5. Open the ‘Ez iCam’ application, the app home screen (Figure
1) will open and ‘Sports Cam’ will appear in the device list.
Press on the device to enter the camera dashboard. If the
camera doesn’t appear on the list, search for devices by
pressing the top right refresh / + button.
[continued...]