Kitvision ESCAPE 4KW - Connecting your camera; Connecting the camera to an HDTV; Connecting the camera to a PC; Connecting the camera to a PC with the USB cable

28 29
Connecting the camera to a PC with the USB cable
1. Connect one end of the supplied USB cable to the camera’s
micro USB input (6), and the other end to the PC’s USB port
and turn the camera on.
2. Turn on the camera. A ‘Connecting’ prompt will appear on the
built-in LCD (10).
3. Open [My Computer] or [Windows Explorer
®
] on your PC.
‘Removable Disk’ will be in the drive list. Double-click the
‘Removable Disk’ icon to view its contents. Files stored on the
camera are located in the folder named ‘PHOTO’ and ‘VIDEO’.
4. CopyordeletethelesthatyouwanttoyourPC.
Connecting your camera
Connecting the camera to an HDTV
1. Connect the micro HDMI end of a micro HDMI to HDMI cable
(not included) to the camera’s Micro HDMI output (8), and the
other end to the HDTV’s HDMI port.
2. Turn on the HDTV and select the appropriate HDMI source.
3. Followtheinstructionsforplayingbackles(page14).
4. Whenviewingisnished,turnothecameraandHDTV
before removing the HDMI cable.
Note: The screen will mirror the information on the camera screen.
Connecting the camera to a PC
Therearetwowaystodownloadlesfromthecamera’smicro
SDtoacomputer:
• By inserting the micro SD into a card reader
• By connecting the camera to a computer using the supplied
micro USB cable