30 31
Using the waterproof case
1. Open the waterproof case by releasing the clip on the top of
the case. To do so, pull the front of the clip backwards and
remove the camera.
2. Insert the camera correctly so that the case closes easily and
provides a tight seal.
3. Snap the top clip shut to ensure the case is waterproof.
4. To operate the camera, use the waterproof case’s external
spring buttons.
Waterproof case
The Escape 4KW Action Camera includes a case that is
waterproof up to 30 metres. When using the camera in a wet
environment, always use the waterproof case. It is recommended
that the case be used at all times for protection reasons.
To Next Page
Loading...
