42 43
Care for your Escape 4KW Action Camera
Please DON’T:
• Get the camera wet, unless sealed in the included waterproof
case
• Drop the camera as this will invalidate your warranty
• Open up the camera. There are no user serviceable parts
inside
• Expose the camera to extreme temperatures or rapid changes
of hot to cold or vice versa
Please DO:
• Clean the camera with a soft dry cloth and no detergents
• Clean the camera case after it has been in water (salt
especially) with fresh tap water
• Use a soft dry cloth to wipe the surface then leave in a cool,
ventilated place to dry
Troubleshooting
We hope you’ve now got all the information you need to get
started, but if you’re having problems with anything, please feel
freetocontactusat:
support@kitvision.co.uk or visit www.kitvision.co.uk
Please do not attempt to open this product. There are no user serviceable
parts inside, in particular if your product has an embedded, non-
replaceable battery, do not attempt to access or remove the battery as this
maycausepersonalinjuryandwilldamagetheproduct.
Making any attempt to open the product or carry out repair voids any and
all warranties
We apologise for any inconvenience caused by minor inconsistencies in
these instructions, which may occur as a result of product improvement and
development.
To Previous Page
Loading...
