Kitvision ESCAPE 4KW - Using playback mode; Viewing video files; Removing the battery

14 15
[...continued] Using time lapse mode
Viewing video les
1. OnceavideoleisselectedpresstheShutter/OkButton(1)to
play.
2. WhilstplayingthevideoleyoucanrewindbypressingtheUp
Button (11) or fast forward by pressing the Down/Wi-Fi Button
(13).
3. Whilst playing the video you can pause by pressing the
Shutter/Ok Button (1).
4. Press the Power/Mode Button (3) to return to the selection
screenwhenthevideoleispausedornished.
Removing the battery
1. Lift the battery cover (14) by lifting the battery cover latch (15).
2. Pull the battery tab to remove the rechargeable battery.
6. Use the built-in LCD (10) to view your shot, and then press the
Shutter/Ok Button (1) to activate the Time Lapse photo
sequence. At every set interval the built-in LCD (10) will black
outandthecamerawillsounda‘Beep/Shutter’soundeect.
7. The camera will continue to take a photo at every interval until
deactivated by pressing the Shutter/Ok Button (1) again.
Using playback mode
1. Turn on the camera and press the Up Button (11) and choose
video playback or photo viewer and then press the Shutter/
OK Button
2. TonavigatethroughyourlesusetheUpButton(11)and
Down/Wi-Fi Button (13).