Klein Tools MM325 User Manual

8
DC CURRENT 200mA to 10A
1. For DC currents more than 200mA and less than 10A, insert
RED test lead into 10A jack
3
, and BLACK test lead into COM
jack
4
, and rotate Function Selector Switch
2
to the
10A DC setting.
DC VOLTAGE (LESS THAN 600V)
1. Insert RED test lead into VΩ jack
5
, and BLACK test lead into
COM jack
4
, and rotate Function Selector Switch
2
to the
highest V DC (
) setting (600V).
2. Measure voltage and rotate the Function Selector Switch
to successively lower V DC (
) settings to obtain higher
resolution measurements.
NOTE: When in a voltage setting and the test leads are open,
readings of order mV may appear on the display. This is noise and
is normal. By touching the test leads together to close the circuit
the meter will measure zero volts.
NOTE: The hazardous voltage indicator will appear for voltages >30V.
NOTE: Do not attempt to measure more than 600V or 200mA.
Red lead Black lead
Red leadBlack lead
ENGLISH
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com

Klein Tools MM325 Specifications

General

Diode test	Yes
Product type	Digital multimeter
Product color	Black, Orange
DC current range	0 - 10 A
DC voltage range	0 - 600 V
Housing material	Acrylonitrile butadiene styrene (ABS)
Resistance range	0 - 2000000 Ω
Measuring category	CAT III 600V
Placement supported	Handheld multimeter
Sustainability certificates	UKCA
Battery type	AAA
Power source	Battery
Number of batteries supported	2

Weight and Dimensions

Depth	162 mm
Width	79 mm
Height	46 mm
Weight	250 g