Need help?Do you have a question about the Klein Tools MM320 and is the answer not in the manual?
General| Category | Multimeter |
|---|---|
| Model | MM320 |
| Voltage Rating | 600V |
| Current Rating | 10A |
| Resistance | 40MΩ |
| Continuity Test | Yes |
| Audible Continuity | Yes |
| Diode Test | Yes |
| Display | LCD |
| Display Count | 2000 |
| Safety Rating | CAT III 600V |
| Backlight | No |
| Auto Power Off | Yes |
| Low Battery Indicator | Yes |
| Type | Digital |
| AC Voltage Range | 600V |
| DC Voltage Range | 600V |
| Resistance Range | 40 MΩ |
| Battery Type | AAA |
| Dimensions | 1.5 inches |
States accuracy values and how they are affected by temperature.
Lists standards, pollution degree, calibration, and safety ratings (CAT III).
Before each use, verify meter operation with a known voltage or current.
Do not exceed voltage ratings or use in storms/wet weather.
Do not use damaged meter or leads; use CAT III/IV rated leads.
Ensure proper probe seating and avoid touching contacts.
Exercise caution with high voltages and replace batteries promptly.
Do not measure resistance or continuity on live circuits.
Proper method for connecting test leads to ensure accurate readings.
Ensuring test lead shield is firmly in place for safety.
Steps for measuring DC voltage up to 600V.
To Next Page