1. For your safety
1.1 Regulations
The construction and design of the process coolers are in compliance with
the following national and international regulations.
EG- recommendation
- EC Machinery Directive 2006/42/EWG
- EC Low Voltage Directive 2006/95/EG
- EC EMC Directive 2004/108/EG
- EC Pressure Equipment-Directive 1997/23/EG
European Standards (EN)
EN 378 Refrigerantion plants and heat pumps
- Safety-relevant and environmental requirements
Part 1 Basic requirements, definitions,
classifications, and applications
Part 2 Design, manufacture, testing, marking, and
documentation
Part 3 Place of installation and protection of staff
Part 4 Operation, maintenance, repair, and recovery.
EN 60529 Degrees of protection provided by enclosures (IP)
EN 12100/T1/T2 Safety of machinery
- Basic terminology, methodology
- Technical guidelines and specifications
EN 394 Safety of machinery
- Minimum clearances to prevent crushing of body
parts
EN 60204 Electrical equipment of machinery
EN 61000-6-4 Electromagnetic compatibility – generic emission
standard
- Generic specification „ Noise transmission „
- residential, commercial, light industry and
industrial environment
EN 6100-6-1 Electromagnetic compatibility – generic immunity
EN 6100-6-2 standard
- Generic specification „ resistance to jamming „
- residential, commercial, light industry and
industrial environment
National Regulation
BGR 500 Operating method of work equipment,
Operating method of work equipment concerning
refrigeration plants, heat pumps and cooling
equipment
To Next Page
Loading...
