BAC-120063CW-ZEC FlexStat 12 Installation and Configuration Guide, Rev. G
Important Notices
The material in this document is for information
purposes only. The contents and the product it
describes are subject to change without notice.
KMC Controls, Inc. makes no representations or
warranties with respect to this document. In no event
shall KMC Controls, Inc. be liable for any damages,
direct or incidental, arising out of or related to the
use of this document.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation. A BAC-12xxxx Class B digital
apparatus complies with Canadian ICES-003.
Additional Resources
See additional information about this model FlexStat
on the BAC-120063CW-ZEC web page.
For general operation, conguration, troubleshoot-
ing, and other information, see the (generic) FlexStat
Operation Guide and FlexStat Application Guide.
See also the BAC-8000 series for information about
the VAV controller-actuators.
See also the CSP-4702 page for information about the
dierential pressure controller/actuator.
For remotely monitoring and changing the
conguration, see the BAC-5051E Router
Application and Installation Guide.
For IoT use with KMC Commander, see VAV and
IoTRetrotsforVVTApplicationGuide.
© 2019 KMC Controls, Inc. 913-019-30G
KMC Controls, Inc.
19476 Industrial Drive
New Paris, IN 46553
574.831.5250
www.kmccontrols.com
info@kmccontrols.com
IoT (KMC Commander) Interface
KMC Commander provides an easy setup and
interface of zoning (via web page or phone app) with
remote monitoring and control, scheduling, trends,
alarms, and integration with other IoT (Internet of
Things) devices. For information, see VAV and IoT
RetrotsforVVTApplicationGuide.
To Previous Page
Loading...
Need help?
General
