EVOLUTION Instruction Manual
Version: C (Manual 0901170) 3 2024-1218
0901170 REV.B
Page 3
Introduction
The Evolution™ is a cleaning solution blending and batching system that relies on Knight’s
unique fluid metering technologies to produce precise cleaning solutions. This patent pending
revolutionary flow meter based system includes an advanced microcontroller with special
software algorithms for blending of factory quality, ready-to-use solutions for medical device
presoaking, manual instrument cleaning and hard surface cleaners and disinfectants. Evolution
records each solution blending event to help managers track solution turn over, cleaning/
soaking temperatures and use costs.
Indication for Use
Recommended applications include:
Automatic blending/filling of cleaning solutions into manual instrument cleaning sinks prior to
automatic washing
Automatic blending/filling of cleaning solutions into instrument trays and tubs for soaking of
medical devices
Automatic blending/filling of cleaning solutions into mop buckets or tubs for cleaning of
operating room equipment, floors and sterile processing department sinks and work
surfaces
Installation and Preventative Maintenance
All service and maintenance should be carried out by trained and authorized personnel
Only original Knight replacement parts should be used for repair and maintenance
The unit shall be used in accordance with the procedures and applications contained herein
This operating manual contains all information required for installation, start up
and preventive maintenance.
Note: this operating manual is a required component for the system and should
be made available at all times to the operator and maintenance staff.
To Next Page
Loading...