KNIPEX 97 51 10 - Safety Precautions; Intended Use of the Tool

SafETy
4 Status: 04.11.21
Warranty claims shall expire in particular if:
• Damage is caused through improper operation, use for purposes other
than those specied by the manufacturer, or poor maintenance.
• Repairs or conversions are carried out by unauthorized persons.
• No original accessories or spare parts from KNIPEX are used.
• Defective components are not repaired immediately to minimise the
extent of the damage and so as not to impair the safety of the tool
(obligation to repair).
For the rest, reference is made to the liability and warranty regulations
of the current sales and delivery conditions.
2 Safety
2.1 Intended use
The tool is intended for the following uses:
• Cutting unshielded telephone at cables (6-pin, 8-pin)
• Stripping unshielded telephone at cables (6-pin, 8-pin)
• Stripping CAT cables
• Crimping 6- and 8-pin Western plugs type RJ 11/12 (9.65 mm wide) and
type RJ 45 (11.68 mm wide) on at cables and CAT cables
Any use beyond the intended purpose or any unauthorized modication
shall be considered improper. The operator shall be liable for damages re-
sulting from improper use.
Intended use also includes adhering to these operating instructions. They
must be read in full before use.
Warning!
Danger from sharp blades!
Handling sharp blades is dangerous. For this reason, make sure to handle
your tools with care when working.