KNJN Pluto - Pluto-Ilx

30 pages

Save Page as PDF

To Next Page

To Next Page

To Previous Page

To Previous Page

Loading...

18.3 Pluto-IIx

All IOs use 3.3V powered banks that can use different IO standards like LVTTL3.3 or LVCMOS3.3

Pluto-IIx IOs are not directly 5V tolerant. Check the Spartan-3A user guide for more details.

FPGA RS-232 development boards Page 25

Table of Contents

Default Chapter2
- Table of Contents2
1 Welcome5
- This Guide5
- Why RS-232 FPGA Boards5
- The Pluto Boards5
- Boards Characteristics5
2 Software Tools6
- Important Downloads6
- FPGA Software6
- C/C++ Compiler6
3 Fpgaconf7
- Board Selection7
- Configuring the FPGA7
- Fpgaconf Options7
4 FPGA Boot-PROM (Pluto-II/-IIX/-IIX HDMI/-3)8
- What's the Boot-PROM8
- Boot-PROM Actions8
- Boot-PROM Requirements8
- Boot-PROM and JTAG8
- Boot-PROM On-Demand FPGA Configuration8
5 Fpgaconf Extras9
- Auto Configuration Mode9
- Scrollbar9
- Terminal9
6 FPGA Configuration Using Quartus-II JTAG Support (Pluto-II/-3)10
- JTAG Requirements10
- JTAG Configuration10
7 FPGA Project Using Quartus-II (Pluto/-II/-3)11
- Create a New Project11
- A Simple Start11
8 FPGA Projects with Xilinx's ISE (Pluto-IIX/Hdmi)12
- Create a New Project12
- A Simple Start12
9 FPGA Connections13
- FPGA Pins13
- IO Headers13
- Boot-PROM Connection (Pluto-II/-IIX/Hdmi/-3)13
- HDMI (Pluto-IIX/Hdmi)13
- Power Header13
- TXDI Connector14
- Secondary Connector14
10 JTAG Connection15
- JTAG on Pluto15
- JTAG on Pluto-II15
- JTAG on Pluto-IIX/Hdmi15
- JTAG on Pluto-315
11 Flashy Boards16
- Flashymini Design16
- Flashydemo Design16
12 FPGA Configuration through RS-23217
- Pluto/-II/-IIX FPGA Configuration17
  - With a UART17
  - Without a UART17
- Pluto-3 FPGA Configuration17
13 Quartus-II JTAG Indirect Mode (Pluto-II/-3)18
- What Is It18
- Create a "JTAG Indirect Configuration" File18
- Program the Boot-PROM18
14 Power Requirements19
- Wall Adapter19
- USB to Power Jack Cable19
- Power Consumption19
- Voltage Regulator Temperature19
15 Connecting the Pluto Boards to a PC20
- Serial Connection20
- With a TXDI20
- With a TXDI/MAX232 or TXDI/FTDI20
- Without a TXDI20
16 Sample C Code for RS-232 Win32 Send & Receive21
17 Board Checklist22
- The FPGA Doesn't Configure22
- Boot-PROM Problem22
18 Board Connectors and Headers, with IO Pin Assignments23
- Pluto23
- Pluto-II24
- Pluto-IIX25
- Pluto-IIX HDMI26
- Pluto-327
19 Mechanical Drawings28
- Pluto28
- Pluto-II/-IIX/-IIX HDMI29
- Pluto-330

Related product manuals

KNJN Pluto-IIx HDMI