KDC270/280
Quick Guide
See Reference Manual for more detailed information
Visit store.koamtac.com to purchase additional products and accessories.
QG_KDC270_KDC280_20201014 p2
Product Introduction
The KDC270 Bluetooth barcode scanner is a 1D Laser, CCD, or 2D Imager Bluetooth Barcode Data Collector.
The KDC 280 is a 2D Imager Bluetooth Barcode Datta Collector that supports Bluetooth Low Energy (BLE).
1.1 KDC270/280 Diagram
1.2 How to turn on and off
Refer to the figure in section 1.1 to locate the SCAN button.
a) Press SCAN button for 3 seconds.
b) The KDC will beep when it is turned ON.
To Next Page
Loading...
