KDC270/280
Quick Guide
See Reference Manual for more detailed information
Visit store.koamtac.com to purchase additional products and accessories.
QG_KDC270_KDC280_20201014 p4
2.2 Pairing a KDC270 to your smart device
1. Navigate to the Bluetooth setting on the host PC, Mac, Smartphone, or Tablet.
2. Ensure that Bluetooth is enabled on the host device and searching for devices.
3. Using the KDC, scan the pairing barcode that corresponds to your desired Bluetooth
profile. If you are unsure which Bluetooth profile is right for you, please refer to the
previous panel.
4. Check the list of available Bluetooth devices on your host device.
5. From the list, select KDC270 listed by serial number in brackets that matches the serial
number found on the back side of the KDC270.
6. In HID mode, KDC270 is now ready to use.
7. To complete connection in SPP/MFi mode, launch KTSync or your application and
select KDC270.
* The KDC270 will beep when successfully connected.
Android, Mac, Windows: HID Normal
SPP & MFi
iOS: HID iOS
To Next Page
Loading...
