18
CARE AND MAINTENANCE
All maintenance should only be carried out by an authorized service organization.
Cleaning
Before cleaning or performing any maintenance, remove the battery pack from the tool. For safe and
proper operation, always keep the tool and its ventilation slots clean.
Always use only a soft, dry cloth to clean your circular saw; never use detergent or alcohol.
TROUBLESHOOTING
WARNING: Remove battery pack from the saw before performing troubleshooting procedures.
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
Blade binds, jams, or
burns the wood
1. Improper operation
2. Dull blade
3. Improper blade
4. Warped blade
1. See “OPERATING INSTRUCTIONS” section
2. Replace or sharpen blade
3. Replace blade
4. Replace blade
Saw vibrates or
shakes
1. Damaged blade
2. Loose blade
1. Replace blade
2. Tighten blade bolt
5-YEAR HASSLE-FREE WARRANTY
This circular saw is warranted to the original purchaser from the original purchase date for ve (5)
years subject to the warranty coverage described herein.
This circular saw is warranted for the original user to be free from defects in material and
workmanship.
If you believe that the circular saw is defective at any time during the specied warranty period, simply
return the circular saw along with proof of purchase to the place of purchase for a free replacement or
refund, or call 1-888-3KOBALT (1-888-356-2258) for warranty service.
This warranty is void if: defects in materials or workmanship or damages result from repairs or
alterations which have been made or attempted by others or the unauthorized use of nonconforming
parts; the damage is due to normal wear, damage is due to abuse (including overloading of the tool
beyond capacity), improper maintenance, neglect or accident; or the damage is due to the use of the
tool after partial failure or use with improper accessories or unauthorized repair or alteration.
This warranty excludes blades, bits, bulbs and accessories.
This warranty gives you specic legal rights, and you may also have other rights that vary from state
to state.
Printed in China
Kobalt
®
& K Design
®
are registered trademarks
of LF, LLC. All rights reserved.
kobalttools.com
To Previous Page
Loading...
Need help?
General