7
SAFETY INFORMATION
• Thelowerguardshouldberetractedmanuallyonlyforspecialcuts,suchas“plungecuts”
and“compoundcuts.”Raisethelowerguardwiththeretractinghandleand,assoonas
bladeentersthematerial,thelowerguardmustbereleased.For all other sawing, the lower
guard should be allowed to operate automatically.
• Alwaysobservethatthelowerguardiscoveringthebladebeforeplacingthesawdownon
thebenchoroor. An unprotected, coasting blade will cause the saw to walk backwards, cutting
whatever is in its path. Be aware of the time it takes for the blade to stop after switch is released.
Additional Safety Rules For Circular Saws
a. Always wear a dust mask
b. Only use recommended saw blades
c. Always wear hearing protection
d. Do not use with any abrasive wheels
WARNING: Some dust created by power sanding, sawing, grinding, drilling and other
construction activities contains chemicals known to the state of California to cause cancer,
birthdefectsorotherreproductiveharm.
Some Examples of these Chemicals are:
— Lead from lead-based paints.
— Crystalline silica from bricks, cement, and other masonry products.
— Arsenic and chromium from chemically treated lumber.
Your Risk From These Exposures Varies, Depending Upon How Often You Do
ThisTypeOfWork.
To reduce your exposure to these chemicals:
— Work in a well-ventilated area.
— Work with approved safety equipment, such as dust masks that are specially designed to lter
out microscopic particles.
Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling, and other
construction activities. Wear protective clothing and wash exposed areas with soap and water.
Allowing Dust to Get Into Your Mouth or Eyes or to Lie on the Skin May Promote Absorption
ofHarmfulChemicals.
PREPARATION
Know Your Circular Saw
Before attempting to use the circular saw, familiarize yourself with all of its operating features and
safety requirements.
To Next Page
Loading...
Need help?
General