15
Hedge Trimmer Blade Maintenance
Note:
Before performing maintenance, disconnect the power source.
1. Remove dirt and debris from blades using a small dry
paint brush or equivalent (not included).
2. Clean blades by spraying an appropriate degreaser (not
included) on the blades and cutting bar.
3. After heavy use, it is recommended to thoroughly
check your blades for deformation or imperfections
and, if required, le edges to provide a sharper cut.
Always use a metal le (not included). If necessary, it
is recommended to take it to a qualied technician to
sharpen blades.
CARE AND MAINTENANCE
To Next Page
Loading...
Need help?
General