Kobalt KHV24 - Page 5

Please read and understand this entire manual before attempting to assemble or operate this product.
If you have any questions regarding the product, please call customer service at 888-3KOBALT,
8 a.m. - 8 p.m., EST, Monday - Sunday. You could also contact us at ascs@lowes.com.
CAUTION
• This inator operates on the kobalt 24v max lithium-ion battery system (sold separately). Do not
attempt to operate this high volume inator with any other battery, source or voltage. Do not
rewire or recongure inator from its original design or personal injury or bodily harm may occur.
WARNING
• You must read, understand and follow all warnings on the kobalt 24V battery pack before using it
and this inator.
WARNING
• The operation of any power tool can result in foreign objects being thrown into your eyes, which can
result in severe eye damage. Before beginning power tool operation, always wear safety goggles
or safety glasses with side shields and a full-face shield, when needed. We recommend using a
wide vision safety mask over eyeglasses or standard safety glasses with shields. Always use eye
protection marked to comply with ANSI Z87.1.
• The safety instructions provided in this manual are not intended to cover all possible conditions that
may occur during product operation. Always use common sense and pay attention to all WARNING
and CAUTION statements in this manual.
• Work Area: Keep your work area clean and well lit. Cluttered benches and dark areas increase the
possibility of personal injury or property damage.
• Do not operate power tools in explosive atmospheres, such as in the presence of ammable
liquids, gases or dust.
• Keep bystanders, children and visitors away while operating a power tool. Distractions can
cause you to lose control.
• Know the Tool: To operate this tool, carefully read this manual and all labels afxed to the tool
before using it. Keep this manual available for future reference.
• Important: This tool should be serviced only by a qualied service technician.
• Read All Instructions Thoroughly
Some of the following symbols may be used on this tool. Please study them and their meaning. Proper
interpretation of these symbols will allow you to operate the tool better and more safely.
PART DEFINITION SYMBOL DEFINITION
V Volts n
0
No-load Speed
A Amps /min
Revolutions or Strokes per
minute
Hz Hertz Direct Current
W Watts
Alternating Current
Work Area Safety
• Keep work area clean and well lit. Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of ammable liquids,
gases or dust. Power tools create sparks, which may ignite the dust or fumes.
• Keep children and bystanders away while operating a power tool. Distractions can cause you to
lose control.
Personal Saftey
• Stay alert, watch what you are doing and use common sense when operating a power tool. Do
not use a power tool while you are tired or under the inuence of drugs, alcohol or medication. A
moment of inattention while operating power tools may result in serious personal injury.
• Use personal protective equipment. Always wear eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing protection, used for appropriate conditions, will
reduce personal injuries.
Power Tool Saftey and Care
• Do not force the power tool. Use the correct power tool for your application. The correct power tool
will do the job better and safer at the rate for which it was designed.
• Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be repaired.
• Disconnect the plug from the power source and/or the battery pack from the power tool before
making any adjustments, changing accessories, or storing power tools. Such preventive safety
measures reduce the risk of starting the power tool accidentally.
• Store idle power tools out of the reach of children and do not allow persons unfamiliar with the
power tool or these instructions to operate the power tool. Power tools are dangerous in the hands
of untrained users.
Battery Tool Use and Care
• See Separate Lithium-Ion Battery Manual for More Information and Warnings.
• Recharge only with the charger specied by the manufacturer. A charger that is suitable for one
type of battery pack may create a risk of re when used with another battery pack.
• Use power tools only with specically designated battery packs. Use of any other battery
packs may create a risk of injury and re.
• When battery pack is not in use, keep it away from other metal objects like paper clips,
coins, keys, nails, screws or other small metal objects that can make a connection from one
terminal to another. Shorting the battery terminals together may cause burns or a re.
• Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact
accidentally occurs, ush with water. If liquid contacts eyes seek medical help. Liquid ejected
from the battery may cause irritation or burns.
Service
• Have your power tool serviced by a qualied repair person using only identical replacement
parts. This will ensure that the safety of the power tool is maintained.
SAFETY INFORMATION
5