Kobalt KHV24 - Safety Information

SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble or operate this product.
If you have any questions regarding the product, please call customer service at 888-3KOBALT,
8 a.m. - 8 p.m., EST, Monday - Sunday. You could also contact us at ascs@lowes.com.
CAUTION
• This inator operates on the kobalt 24v max lithium-ion battery system (sold separately). Do not
attempt to operate this high volume inator with any other battery, source or voltage. Do not
rewire or recongure inator from its original design or personal injury or bodily harm may occur.
WARNING
• You must read, understand and follow all warnings on the kobalt 24V battery pack before using it
and this inator.
WARNING
• The operation of any power tool can result in foreign objects being thrown into your eyes, which can
result in severe eye damage. Before beginning power tool operation, always wear safety goggles
or safety glasses with side shields and a full-face shield, when needed. We recommend using a
wide vision safety mask over eyeglasses or standard safety glasses with shields. Always use eye
protection marked to comply with ANSI Z87.1.
• The safety instructions provided in this manual are not intended to cover all possible conditions that
may occur during product operation. Always use common sense and pay attention to all WARNING
and CAUTION statements in this manual.
• Work Area: Keep your work area clean and well lit. Cluttered benches and dark areas increase the
possibility of personal injury or property damage.
• Do not operate power tools in explosive atmospheres, such as in the presence of ammable
liquids, gases or dust.
• Keep bystanders, children and visitors away while operating a power tool. Distractions can
cause you to lose control.
• Know the Tool: To operate this tool, carefully read this manual and all labels afxed to the tool
before using it. Keep this manual available for future reference.
• Important: This tool should be serviced only by a qualied service technician.
• Read All Instructions Thoroughly
Some of the following symbols may be used on this tool. Please study them and their meaning. Proper
interpretation of these symbols will allow you to operate the tool better and more safely.
PART DEFINITION SYMBOL DEFINITION
V Volts n
0
No-load Speed
A Amps /min
Revolutions or Strokes per
minute
Hz Hertz
Direct Current
W Watts
Alternating Current
4