10
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
Unit will not start 1. Battery not installed correctly.
2. Battery not charged.
1. Plug in correct Kobalt 24V Max Battery
see page 7 for more information.
2. Check Battery level and charge if
needed (see 24V Battery Manual)
Unit slow or does
not perform well.
1. Battery not fully charged.
2. Ination/Deation Ports are
blocked.
1. Check Battery level and charge if
needed (see 24V Battery Manual)
2. Check both Ports (C) and (D).
Remove nozzles, or other materials
that may be obstructing air ow.
REPLACEMENT PARTS LIST
For replacement parts, call our customer service department at 888-3KOBALT, 8:00 a.m. – 8:00 p.m.,
ET, Monday – Sunday. You could also contact us at ascs@lowes.com
Printed in China
PART DESCRIPTION PART #
F Tethered Nozzle Set 40883-KHV24-F
• Remove 24V Battery Pack and then wipe the plastic parts of the inator clean using mild soap and
warm water. Do not get moisture or water into interior, moving parts or the battery adaptor. (Allow
entire inator to dry completely before use.)
• Read and follow separate Battery Instructions for care and maintenance of Kobalt 24V Max Lithium
Ion Batteries.
For ve (5) years from the date of purchase, the Inator is warranted and for three (3) years from date
of purchase the battery & charger are warranted for the original purchaser to be free from defects
in material and workmanship. This guarantee does not cover damage due to abuse, normal wear,
improper maintenance, neglect, unauthorized repair/alteration, or expendable parts and accessories
expected to become unusable after a reasonable period of use.
If you think your product meets the above guarantee criteria, please return it to the place of purchase
with valid proof of purchase and the defective product will be repaired or replaced at no charge. This
guarantee gives you specic legal rights, and you may also have other rights that vary from state to
state.
CARE MAINTENACE
WARRANTY
F
F
To Next Page
Loading...
