Kobalt KHV24 - Page 9

CAUTION
• This inator is not a toy - do not aim at yourself or others.
WARNING
• Please read, understand and follow all warnings before using this inator.
• The High-Volume Inator is designed for air mattresses, rafts, beach toys and other high volume
inatables. Use Extra Caution if using to clean debris from workspaces. Do not aim at yourself,
others or pets.
• Read and follow all manufacturers’ instructions and warnings for the item you are inating.
OPERATING INSTRUCTIONS - DEFLATION
3. To Deate
• Make sure that Ination Port (C) is pointed away
from yourself and others.
(see WARNING on page 6)
• Firmly snap the Kobalt 24V Max Battery into
place (see page 7) for more details.
• Select the appropriate size nozzle from the
Tethered Nozzle Set (F) and insert it into the
Deation Port (D). Nozzles do not lock into the
Deation Port (D) – no twisting is required (see
3a below).
• Insert the tip of the nozzle into the item you are
deating.
• Press the On/Off Power Trigger (B) to lock the
inator into the On position and begin deating.
CAUTION:
• When the item is empty (there is no more air to remove) the inator’s air intake is blocked and
motor damage can occur. Turn the Inator Off Immediately.
• When deating, make sure that the Ination Port (C) is clear. The Ination Port is the air exhaust
and blocking it will cause poor performance and can damage the motor.
• Press the On/Off Power – Trigger (B) to turn the inator Off when nished.
• Remove the nozzle and battery. Store all in a clean and dry environment (see page 10)
C
3
F
F
C
9