Kobalt KHV24 - Preparation

SAFETY INFORMATION
WARNING
• Do not allow familiarity with the inator to cause carelessness. Remember that one careless
moment is enough to cause severe injury. Before attempting to use any tool, be sure to become
familiar with all of the operating features and safety instructions.
• Do not attempt to modify this tool or create accessories not recommended for use with this tool.
Any such alteration or modication is misuse and could result in a hazardous condition leading to
possible serious personal injury.
L
WARNING
CC
B
DO NOT POINT THE INFLATION PORT (C) AT
YOURSELF (OR OTHERS) WHEN ATTACHING
THE BATTERY PACK.
Use CAUTION and see: To Attach Battery Pack (on facing page)
The On/Off Power Trigger with Locking Feature
(B) is hard-wired and works independently of
the battery pack – it can be pushed into the
On position (when not attached to the battery)
and this can cause the inator to run – blow air
through the Ination Port (C) as soon as it is
attached to the battery pack.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble
the product.
• Make sure that your inator’s battery adaptor is free of any residue or debris. A dirty 24 volt power
connection can cause the inator and battery to overheat. Overheating can cause damage to your
inator/battery and could cause bodily harm or injury. Disconnect battery when not in use.
• It is recommended that your Kobalt 24V Max Battery be fully charged to get the best performance
from your inator. If your battery is weak, the inator will not work at its maximum output level. See
Battery User’s Manual for charging and testing information.
• This inator is designed to inate rafts, air mattresses, beach toys and other high volume
inatables. Use Extra Caution if using to clean debris from workspaces. Do not aim at yourself,
others or pets.
• Follow the manufacturer’s instructions for the item you are inating.
• Keep the inator away from ammable areas/liquids at all times.
• Do not operate the inator in wet or damp areas.
• Operate the inator only with the nozzles that are included.
• Do not leave the inator unattended while in operation.
• USE SAFETY GLASSES. Also use face or dust mask if operation is dusty.
• After using, turn off power and disconnect battery.
• Do not carry inator by the tethered nozzles as damage may occur.
• The inator is not a toy. Keep away from children at all times.
6