Kobalt KWS B7-06 User Manual

19
kobalttools.com
ASSEMBLY INSTRUCTIONS
Installing the Miter Guide
1. Align groove under miter gauge (C) with grooves
in top of the rip guide rail (D). Push miter guide
onto rip guide to desired operating position.
Note: Slide miter guide off rip guide to remove.
InstallingtheOverowDrain
1. Remove bevel table (L).
2. Firmly push overow drain (G) into the hole in
the bottom of the water reservoir (K).
2
1
1
C
D
1
L
2
G
K

Kobalt KWS B7-06 Specifications

General

Brand	Kobalt
Model	KWS B7-06
Category	Saw
Language	English