KOBE CHX91 SQB-1 User Manual

KOBE Range Hoods
“So Quiet…You Won’t Believe It’s On!”
Page 1 of 9
Version 20160725
CHX91 SQB-1 Parts Location and Replacement
This basic guide is to show the parts location of the CHX91 SQB-1 and how to remove or install certain parts.
To see more detailed guidelines, please visit: Kobe Service and Repair
For under cabinet models: CHX9130SQB-1 and CHX9136SQB-1
For wall mount models: CHX9130SQB-WM-1 and CHX9136SQB-WM-1
Overall Snapshot of CHX91 SQB-1
1. Plastic Oil Tunnel (Manual Part #16 – See “Parts List” page on manual)
2. Safety Screen (Manual Part #17 – See “Parts List” page on manual)
3. LED Light (3W) (Manual Part #6 – See “Parts List” page on manual)
2
2
3
1
1
3

KOBE CHX91 SQB-1 Specifications

General

Series	CHX91
Lighting	LED
Finish	Stainless Steel
Material	Stainless Steel
Color	Stainless Steel
Duct Size	6 inches
Speed Levels	3
Voltage	120V
Filter Type	Baffle Filter
Size	30"
Width	30 inches

Summary

CHX91 SQB-1 Parts Overview

Plastic Oil Tunnel

Identifies the plastic oil tunnel component, part #16, for the CHX91 SQB-1 range hood.

Safety Screen

Identifies the safety screen component, part #17, for the CHX91 SQB-1 range hood.

LED Light

Identifies the 3W LED light component, part #6, for the CHX91 SQB-1 range hood.

Capacitor Support Removal

Capacitor Support

Details the procedure for removing the capacitor support, identified as part #9.

LED Driver and Capacitor Access

LED Light Driver

Locates and describes accessing the LED light driver, part #11.

Capacitor

Locates and describes accessing the capacitor, part #10.

Control Switch Access

Control Switch

Details the procedure for accessing the control switch, part #8.

Impeller and Motor Removal

Turbine Impeller

Describes the removal of the turbine impeller, identified as parts #14 and #15.

Motor

Details the removal of the motor, identified as parts #12 and #13.

Motor Installation Notes

Removing the Motor

Explains the steps for removing the motor from the range hood.

Attaching Back the Motor

Provides instructions and notes for properly reattaching the motor.

Impeller Attachment

Attaching Back the Impeller

Provides instructions for correctly attaching the impeller to the motor.

Impeller Attachment Details

More on Attaching the Impeller

Offers additional guidance and warnings for attaching the impeller.

Impeller Positioning

Placing Impellers Correctly

Explains how to correctly position the left and right impellers based on motor markings.