KOBE Brillia RAX2130SQB-1 User Manual (English)

Questions and Answers:

M
moorelisaJul 29, 2025
Why is my KOBE Brillia RAX2130SQB-1 not venting properly?
- G
  Gregory RichardsonJul 29, 2025
  If your KOBE Ventilation Hood is not venting out correctly, several factors could be the cause. First, the hood might be installed outside the manufacturer's recommended clearance (26” to 30” between the range hood and cook top, or 30” to 36” for island range hoods), so adjust the height accordingly. Second, there might not be enough make-up air inside the house; opening a window can help. Third, there could be an obstacle blocking the pipe work, which needs to be removed. Finally, the pipe size might be smaller than the suggested size, so change the ducting to match the manufacturer's suggestion.
C
Cody HernandezAug 2, 2025
Why is cold air coming in through my KOBE Brillia RAX2130SQB-1?
- T
  thomasjessicaAug 3, 2025
  If cold air is coming into your home through the KOBE Ventilation Hood, it could be due to a few reasons. The pipe connection might not be properly sealed, so check the pipe installation. Also, the damper might not be properly installed or missing; check the damper installation. Installing the damper will help eliminate air backflow.
M
Mary HarveyAug 8, 2025
What to do if the lights are not working on my KOBE Brillia RAX2130SQB-1?
- O
  ogarzaAug 8, 2025
  If the motor is working but the lights are not on your KOBE Ventilation Hood, the LED light fixture(s) might be defective and needs replacement. Also, the light wiring(s) could be loose, so check the wire continuity from the Control Panel to the LED Driver and then to the LED light fixture(s). Finally, the control panel or LED light driver could be defective, requiring replacement.
J
johnsonjustinAug 13, 2025
How to troubleshoot a KOBE Brillia RAX2130SQB-1 Ventilation Hood with no power after installation?
- S
  Sherry Coleman DVMAug 13, 2025
  If, after installation, both the motors and lights on your KOBE Ventilation Hood are not working, here are a few things to check: * Ensure that the circuit breaker and the unit's power are turned ON. Use a voltage meter to verify the power supply. * Inspect the wire connections to ensure they are secure and tight. * If the above steps don't resolve the issue, the control panel might be defective and need replacement.
L
Lindsey GentryAug 17, 2025
Why is my KOBE Brillia RAX2130SQB-1 vibrating?
- C
  charles98Aug 17, 2025
  If your KOBE Ventilation Hood is vibrating, it could be due to a few reasons. First, the blower system might not be secure; tighten the turbine impeller/squirrel cage and air chamber. Second, the turbine impeller/squirrel cage might not be balanced, requiring replacement. Lastly, the hood itself might not be secured in place; check the installation and tighten the mounting bracket.
D
Donald CarrollAug 23, 2025
What to do if the lights work but the motor doesn't on my KOBE Brillia RAX2130SQB-1?
- P
  Pam ButlerAug 23, 2025
  If the lights are working but the motor(s) is not on your KOBE Ventilation Hood, the motor(s) may be defective and require replacement. Alternatively, the capacitor(s) could be defective and need replacement. Finally, the control panel might be defective, necessitating replacement.

KOBE Brillia RAX2130SQB-1 Specifications

General

Brand	KOBE
Model	RAX2130SQB-1
Category	Ventilation Hood
Series	Brillia
Type	Under Cabinet
Width	30 inches
Airflow	750 CFM
Lighting	LED
Control Type	Push Button
Finish	Stainless Steel
Material	Stainless Steel
Color	Stainless Steel
Number of Bulbs	2
Number of Motors	1
Filter Type	Baffle
Width (mm)	762 mm
Duct Type	Ducted