KOBE IN2636SQB User Manual (English)

Questions and Answers:

S
saraduncanJul 26, 2025
Why is my KOBE Ventilation Hood not venting out correctly?
- M
  masonamandaJul 26, 2025
  If your KOBE Ventilation Hood isn't venting correctly, consider these possibilities: * The hood might be installed outside the recommended clearance. Adjust the clearance between the hood and cooktop to 27”-30” (or 30”-36” for island hoods). * There may not be enough make-up air in the house. Open a window to improve performance. * There could be obstacles blocking the pipe work. Remove any obstructions from the duct work. * The pipe size might be too small. Change the ducting to match the manufacturer's suggestion.
D
David HorneAug 1, 2025
What to do if my KOBE Ventilation Hood is not working after installation?
- M
  Michael JimenezAug 1, 2025
  If your KOBE Ventilation Hood isn't working after installation, there are several potential causes: * The power may not be on. Ensure the circuit breaker and the unit's power are ON, and use a voltage meter to check the power supply. * The wire connection might not be secure. Check and tighten the wire connections. * The control panel and processor board wiring could be disconnected. Check wire continuity from the control panel to the processor board. * The motor transformer may be defective. Check the power input and output on the motor transformer and replace it if needed. * The control panel or processor board could be defective. Consider replacing either the control panel or processor board.
E
Emily CastroAug 7, 2025
Why is my KOBE Ventilation Hood vibrating?
- R
  Ryan MarshAug 7, 2025
  If your KOBE Ventilation Hood is vibrating, it could be due to a few reasons: * The blower system might not be secure. Tighten the turbine impeller/squirrel cage and air chamber. * The turbine impeller/squirrel cage could be unbalanced. Replace the turbine impeller/squirrel cage. * The hood might not be secured in place. Check the installation and tighten the mounting bracket.
S
Samantha RangelAug 13, 2025
What to do if cold air is coming into my home from the KOBE Ventilation Hood?
- A
  awilsonAug 13, 2025
  If cold air is entering your home through the KOBE Ventilation Hood, consider the following: * The pipe connection may not be properly sealed. Check the pipe installation. * The damper might be improperly installed or missing. Check the damper installation. Installing a damper can help prevent air backflow.
S
Steven DominguezAug 18, 2025
How to fix a KOBE Ventilation Hood when the lights are working, but the motor isn't?
- G
  gary80Aug 18, 2025
  If the lights on your KOBE Ventilation Hood are working, but the motor isn't, here are some potential solutions: * The motor(s) may be defective. Replace the motor. * The capacitor(s) could be defective. Replace the capacitor(s). * The control panel or processor board might be defective. Replace the control panel or processing board.