KOBE IS2336SQ - User Manual

Questions and Answers

P
paula94Aug 9, 2025
What to do if KOBE Ventilation Hood motors and lights are not working after installation?
- P
  Patricia RobertsonAug 9, 2025
  If, after installation, both the motors and lights on your KOBE Ventilation Hood aren't working, several issues could be the cause. First, ensure that the circuit breaker and the unit's power are turned ON, and use a voltage meter to verify the power supply. Next, check and tighten all wire connections to ensure they are secure. Also, examine the wire continuity from the control panel to the processor board. The motor transformer might be defective, so check both its power input and output, replacing it if necessary. Lastly, the control panel or processor board itself could be defective, requiring replacement.
K
Kelly HerreraAug 14, 2025
Why is my KOBE Ventilation Hood not venting out correctly?
- E
  Eric HarrisAug 14, 2025
  If your KOBE Ventilation Hood isn't venting out correctly, it might be due to several reasons. First, ensure the hood is installed with the manufacture recommended clearance (27" to 30" between the range hood and cook top, or 30" to 36" for Island range hoods). Insufficient make-up air inside the house can also be a factor, so try opening a window to improve performance. Obstacles in the duct work can impede venting, so remove any obstructions. Finally, ensure the pipe size matches the manufacturer's suggestion, and change the ducting if needed.
R
Robert GlassAug 19, 2025
How to fix KOBE Ventilation Hood when motor works but lights don't?
- M
  matthew64Aug 19, 2025
  If the motor is working but the lights are not functioning on your KOBE Ventilation Hood, the issue could stem from several causes. Start by testing the halogen light bulbs in a working socket to see if they are defective and need replacement. Check the light wiring for any looseness, ensuring wire continuity from the processor board to the light transformer and halogen light housings. Also, examine the light transformer's power input and output, replacing it if necessary. Finally, the control panel or processor board could be defective, requiring replacement.
K
Kevin FordAug 23, 2025
Why is my KOBE Ventilation Hood vibrating?
- B
  Billy SteeleAug 25, 2025
  If your KOBE Ventilation Hood is vibrating, it could be due to a few reasons. First, make sure the blower system is securely tightened, including the turbine impeller/squirrel cage and air chamber. If the vibration persists, the turbine impeller/squirrel cage might be unbalanced and need replacement. Additionally, check the hood's installation to ensure it is properly secured; tighten the mounting bracket if necessary.
W
William YangAug 29, 2025
What to do if KOBE Ventilation Hood lights work but motor doesn't?
- M
  Megan SalinasAug 29, 2025
  If the lights on your KOBE Ventilation Hood are working, but the motor(s) is not, there are a few potential causes. The motor(s) themselves may be defective and require replacement. Alternatively, the capacitor(s) could be defective and need replacing. Lastly, the control panel or processor board could be faulty, necessitating replacement.
V
Virginia CrossSep 3, 2025
Why is cold air coming into my home from KOBE Ventilation Hood?
- A
  Amanda JohnsonSep 3, 2025
  If cold air is coming into your home from the KOBE Ventilation Hood, it could be due to a few reasons. First, check the pipe installation to ensure the connection is properly sealed. Also, verify the damper installation, ensuring it is present and correctly installed, as it helps prevent air backflow. Installing the damper will help to eliminate air backflow.

KOBE IS2336SQ Specifications

General

Brand	KOBE
Model	IS2336SQ
Category	Ventilation Hood
Type	Island
Width	36 inches
Airflow	600 CFM
Lighting	LED
Finish	Stainless Steel
Material	Stainless Steel
Speed Levels	3
Filter Type	Baffle
Duct Type	Round