Operation
Forward and
Reverse
Focus
Autofocus
(Models
4600/5600 only)
Random Projection
10
Press
the forward button on the projector
or
the remote control to project
the first slide.
To
change slides, briefly
press
the forward or reverse
buttons.
Forward
Focus the first slide using the focus knob on the projector,
or
the focus
button on the remote control (Models
4400
and 5600 only).
Focus
Focus
The autofocus feature automatically focuses each slide after you focus your
first slide manually.
If
there
is
a
mix
of
slide mounts in the tray (cardboard,
plastic, and glass), it may be necessary to manually refocus between
mount-type changes. The focus button on the cabled remote can be used
for Models 4400 and 5600.
For random projection
of
any slide in the tray:
•
press
and hold
down
the select bar,
• rotate the tray to the desired slide, and
• release the select
bar.
KODAK
CAROUSEL® Slide Projector
To Next Page
Loading...
