Screen Image
Operation
Use
the elevating foot to horizontally center the projected image on the
screen.
To
release the foot,
press
the release button,
while
lifting the front
of
the projector to the desired height.
Use
the elevating wheel to make fine
adjustments.
If the image
is
not level, make
an
adjustment by turning the leveling foot at
the rear
of
the projector.
Timer
To
time your slides,
use
the timer switch for slide changes from 3 to
(Model
5600
only)
22
seconds.
To
interrupt the timer,
press
either the forward
or reverse button.
For
manual operation,
slide the timer switch to Off.
KODAK CAROUSEL® Slide Projector
3 seconds
22 seconds
11
To Next Page
Loading...
