Getting started
4
■ Visit www.kodak.com/go/cx7220accessories for:
Kodak EasyShare camera dock—powers your camera, transfers pictures to
your computer, and charges the included Kodak EasyShare Ni-MH
rechargeable battery pack.
Kodak EasyShare printer dock—powers your camera, makes 4 x 6 in. (10 x
15 cm) prints with or without a computer, transfers pictures, and charges
the included Kodak EasyShare Ni-MH rechargeable battery pack.
Kodak 3-volt AC adapter—powers your camera.
CAUTION:
Do not use a 5-volt AC adapter (included with the Kodak
EasyShare camera dock and printer dock) to power your
camera.
■ Dirt on the battery contacts can affect battery life. Wipe the contacts with a
clean, dry cloth before loading batteries in the camera.
■ Battery performance is reduced at temperatures below 41° F (5° C). When
using your camera in cold weather, carry spare batteries and keep them
warm. Do not discard cold batteries that do not work; when they return to
room temperature, they may be usable.
For more information on batteries, visit
www.kodak.com/global/en/service/batteries/batteryUsage.jhtml.
Turning the camera on and off
■ Turn the Mode dial from Off to any other
position.
The ready light blinks green while the camera
performs a self-check, then glows green when
the camera is ready.
■ To turn off the camera, turn the Mode dial to
Off.
The camera completes operations that are in
process.
Ready light
To Next Page
Loading...
Need help?
General
