Getting started
7
Review screen
Storing pictures and videos on an SD/MMC
card
Your camera has 16 MB of internal memory. You can purchase optional
SD/MMC cards for removable, reusable storage for pictures and videos.
CAUTION:
Insert card as shown. Forcing it may damage the camera or
card.
Do not insert or remove a card when the green ready light
is blinking; doing so may damage your pictures, card, or
camera.
To insert an SD/MMC card:
1 Turn off the camera and open the card door.
2 Orient the card as shown.
3 Push the card into the slot to seat the
connector and close the card door.
■ To remove the card, turn off the camera.
Push the card in, then release it. When the
card is partially ejected, pull it out.
NOTE: When using a card for the first time, we suggest you format it before you take pictures (see
page 19).
To set the image storage location, see page 15. For SD/MMC card storage
capacities, see Image storage capacities, page 45.
Purchase SD/MMC cards and other accessories at a dealer of Kodak products,
or visit www.kodak.com/go/cx7220accessories.
Favorite tag
Email tag
Print tag/number of prints
Protect
Picture/video number
Image storage location
Status indicator (Review)
Scroll arrows (previous/next picture/video) Low battery (flashing = exhausted)
Notched corner down
To Next Page
Loading...
Need help?
General
