10
Chapter 1
Inserting an MMC/SD Card
Optional MMC/SD cards provide removable, reusable storage for pictures and
videos.
CAUTION:
CAUTION:CAUTION:
CAUTION:
The card can only be inserted one way; forcing it may
damage the camera or card.
Do not insert or remove a card when the green Ready light
is blinking; doing so may damage your pictures, card, or
camera.
To insert an MMC/SD card:
1 Turn off the camera.
2 Open the card door.
3 Orient the card as shown on the card door.
4 Push the card into the slot to seat the
connector.
5 Close the door.
To remove the card, push it in, then release it. When the card is partially
ejected, pull it out.
See page 98 for storage capacities. Purchase accessories at a dealer of Kodak
products or www.kodak.com/go/ls633accessories.
Notched
corner
of card
To Next Page
Loading...
