13
2 Taking Pictures
The camera is ready to take pictures when you turn it on—even if you are in
Review, Share, or Setup. (In Video mode, the camera captures video.) Before
you take a picture, make sure the storage location is set to your preference
(see page 11).
Auto Mode
Use Auto for general picture-taking. Exposure, focus, and flash are automatic.
1 Turn the Mode dial to .
The camera screen displays a mode
description. To interrupt the description,
press .
2 Use the viewfinder or camera screen to
frame your subject. (To turn Liveview on or
off, press the OK button.)
3 Press the Shutter button half-way and
hold. (This sets the exposure and focus so
you get the best possible picture.)
4 When the Ready light glows green, press the Shutter button the rest of
the way down to take the picture.
5 When the Ready light blinks green, the picture is being saved; you can still
take pictures. If the Ready light is red, wait until it turns green.
Ready light
Default flash setting: Auto, Red-eye
Available flash settings: Auto, Flash Off, Fill Flash, Red-eye
Camera returns to default: When you change modes or turn off the
camera.
To Next Page
Loading...
Need help?
General
