67
8 Connecting Camera to
Computer
CAUTION:
CAUTION:CAUTION:
CAUTION:
Install Kodak EasyShare software before connecting the
camera or camera dock to the computer. Failure to do so
may cause the software to load incorrectly.
You can transfer pictures and videos from the camera to the computer using:
m The (included) USB cable
m The (optional) Kodak EasyShare camera dock 6000. See page 69 for
connecting with the camera dock.
m The (optional) Kodak EasyShare printer dock 6000. Purchase accessories
at a dealer of Kodak products or www.kodak.com/go/accessories.
Transferring Pictures with the USB Cable
1 Turn off the camera.
2 Plug the labeled end of the USB cable
into the labeled USB port on your computer.
See your computer user’s guide for details.
3 Plug the other end of the USB cable into the
labeled USB port on the camera.
4 Turn on the camera.
Kodak EasyShare software opens and
prompts you through the transfer process.
NOTE: You can also use a Kodak multi-card reader or Kodak SD multimedia
card reader-writer to transfer your pictures.
To Next Page
Loading...
Need help?
General
