37
3 Taking Videos
Use Video mode to take videos or to customize video-taking settings.
Before you take a video, make sure your picture storage location is set the way
you want it (see page 11).
NOTE: Flash is not available in Video mode. You can change Optical Zoom
before (but not during) video recording.
Taking a Video
1 Turn the Mode dial to Video .
A live image, camera status, and the
recording time available appear on the
camera screen.
2 Use the viewfinder or camera screen to
frame your subject.
3 To begin recording, press the Shutter button
completely down and release within 2
seconds.
The Ready light blinks green and the Self
Timer light stays on while recording.
4 To stop recording, press the Shutter button
again.
Recording also stops if the storage
location is full. See page 98 for video
storage capacities.
NOTE: If you prefer, press the Shutter button completely down and hold it to
begin recording. To stop recording, release the Shutter button after
pressing for more than 2 seconds.
AUTO
OFF
delete
Ready
light
To Next Page
Loading...
