Kodak EasyShare LS633

57
Chapter 6
Turning Off Liveview in Still Modes
The Liveview feature lets you use the camera screen as a viewfinder (see
page 18). The default setting is Liveview On.
To change the Liveview default from On to Off:
1 Press the Menu button.
2 Press to highlight Setup , then press the OK button.
3 Press to highlight Liveview , then press the OK button.
4 Press to highlight Off, then press the
OK button.
Liveview is now Off by default. You can
still press the OK button to turn Liveview
off and on.
5 Press the Menu button to exit the menu.
This setting remains until you change it.