Kodak EasyShare LS753 User Manual

Getting started
7
Flash/Status screen
Press the Flash button. The current camera status icons are displayed in
the bottom half of the Flash screen.
Storing pictures and videos on an SD/MMC
card
Your camera has 32 MB of internal memory. You can purchase optional
SD/MMC cards for removable, reusable storage for your pictures and videos.
CAUTION:
Insert card as shown. Do not force it; doing so may damage
the camera or card.
Do not insert or remove a card when the green ready light
is blinking; doing so may damage your pictures, card, or
camera.
To insert an SD/MMC card:
1 Turn off the camera and open the card door.
2 Orient the card as shown on the camera body.
3 Push the card into the slot to seat the
connector and close the card door.
4 To remove the card, turn off the camera. Push
the card in, then release it. When the card is
partially ejected, pull it out.
NOTE: When using a card for the first time, we suggest you format it before you take pictures
(page 21). Some manufacturers’ cards may have limited video recording capability.
See page 49 for storage capacities. Purchase SD/MMC cards at a dealer of
Kodak products or www.kodak.com/go/ls753accessories.
Other settings
Notched
corner

Kodak EasyShare LS753 Specifications

General

Megapixel	5 MP
Digital zoom	4 x
Optical zoom	3 x
Display diagonal	1.8 \
Digital SLR	No
Minimum RAM	64 MB
Dimensions (WxDxH)	108 x 30 x 49 mm
Self-timer delay	10 s
ISO sensitivity	100, 200, 400
Flash modes	Red-eye reduction

Weight and Dimensions

Weight	165 g