Kodak EasyShare LS753 User Manual

37
6 Transferring and printing
pictures
CAUTION:
Install Kodak EasyShare software before connecting the
camera or optional dock to the computer. Failure to do so
may cause the software to load incorrectly.
Transferring pictures and videos
with the USB cable
1 Turn off the camera.
2 Plug the labeled end of the USB cable
into the labeled USB port on your computer.
See your computer user’s guide for details.
3 Plug the other end of the USB cable into the
labeled USB port on the camera.
4 Turn on the camera.
Kodak EasyShare software opens on your
computer. The software prompts you through
the transfer process.
The green ready light blinks during transfer.
NOTE: Visit www.kodak.com/go/howto for an online tutorial on connecting.
Also available for transferring
You can also use these Kodak products to transfer your pictures and videos.
■ Kodak EasyShare camera dock, Kodak EasyShare printer dock
■ Kodak multi-card reader, Kodak SD multimedia card reader-writer
Purchase these and other accessories at a dealer of Kodak products or
www.kodak.com/go/ls753accessories.

Kodak EasyShare LS753 Specifications

General

Megapixel	5 MP
Digital zoom	4 x
Optical zoom	3 x
Display diagonal	1.8 \
Digital SLR	No
Minimum RAM	64 MB
Dimensions (WxDxH)	108 x 30 x 49 mm
Self-timer delay	10 s
ISO sensitivity	100, 200, 400
Flash modes	Red-eye reduction

Weight and Dimensions

Weight	165 g