Kodak EasyShare LS753

Taking pictures and videos
11
Using the camera screen as a viewfinder
1 Frame your subject in the camera screen.
For more about auto-focus framing marks,
see page 11.
2 Press the Shutter button halfway and hold
to set the exposure and focus. When the
framing marks change color, press the Shutter
button completely down to take the
picture.
3 To turn off the camera screen, press the
OK button.
Using the auto-focus framing marks
When using the camera screen as a viewfinder, framing marks indicate the
area that the camera is focusing on. For the best possible pictures, the camera
attempts to focus on foreground subjects, even if the subjects are not centered
in the scene.
NOTE: This procedure does not apply to videos.
1 Press the Shutter button halfway and hold.
When the framing marks turn red, focus is accomplished.
OK
Framing marks