49 www.kodak.com/go/support
6 Install software
Install software, transfer pictures, and share
IMPORTANT:
To use the sharing and social networking features, you must install the
KODAK Share Button app.
Make sure the computer is connected to the Internet. When you connect the camera
to the computer, the KODAK Camera Setup App automatically runs. Follow the
prompts to install the KODAK Share Button App.
1 Turn off the camera.
2 Use the KODAK Camera USB Cable, Micro B / 5-Pin
to connect the camera to the computer. Use only
the cable included with this camera.
3 Turn on the camera.
4 After the software is installed, follow the prompts
to transfer pictures and videos to your computer.
IMPORTANT:
If the installer does not run, choose and
install the right version for your computer:
www.kodak.com/go/camerasw.
NOTE: You can also use a card reader to transfer pictures/videos.
Download KODAK Software later www.kodak.com/go/camerasw
Get Software help www.kodak.com/go/support
See How-To videos www.kodak.com/go/m577demos
To Next Page
Loading...
