www.kodak.com/go/support 52
7 Troubleshooting
Camera problems
Status Solution
Camera does not
turn on, off; buttons do
not function
■ Remove then reinsert or replace the battery (see page 1).
■ Charge the rechargeable battery (see page 2).
Camera freezes up
when a card is inserted
or removed.
■ Turn the camera off, then back on. Make sure the camera is
turned off before inserting or removing a card.
LCD is too dark. ■ Adjust the LCD Brightness setting (see page 47).
In Review, a blue or
black screen is
displayed instead of
a picture
■ Transfer the picture to the computer (see page 49), then format
the card or internal memory.
■ Take another picture.
In Review, you do not
see a picture (or the
expected picture) on
the LCD
■ Format the card in the camera (see page 48)
Caution: Formatting a card deletes all pictures and
videos, including protected files.
Pictures remaining
number does not
decrease after taking a
picture
■ Continue taking pictures. The camera is operating normally.
(The camera estimates the number of pictures remaining after each
picture is taken, based on picture size and content.)
Camera displays a
High Temperature
error
■ If camera temperature rises to a certain level, a high temperature
error (Video recording will stop in 5 seconds) appears. Turn the
camera off as soon as possible and let it cool down. The camera
cannot capture more videos until it has cooled down. (Captured
videos are not lost.)
To Next Page
Loading...
