Doing more with your camera
www.kodak.com/go/support
41
Setup menu options
Setup
Press Menu, , , and OK to
access settings
Options
LCD Brightness Power Save (default)
High Power
Image Storage
Choose a storage location for
pictures/videos.
Auto (default)—the camera uses the card if
one is in the camera. If not, the camera uses
internal memory.
Internal Memory—the camera uses internal
memory, even if a card is installed.
NOTE: If you fill up your card while taking pictures,
your camera’s memory plus feature prompts
you to switch to internal memory, if space is
available. Memory plus is unavailable in Video
mode.
Set Album
Choose Album names.
On or Off
Pre-select album names before you take
pictures or videos. Then, all the pictures or
videos you take are tagged with those album
names. See page 53.
Capture Frame Grid
Use the frame grid to compose a picture. The
grid divides the LCD screen into
thirds—vertically and horizontally. It’s
helpful if you want to balance a picture
between water, earth, and sky.
On
Off (default)
Orientation Sensor
Orient pictures so that they are displayed
with the correct side up.
On (default)
Off
To Next Page
Loading...
Need help?
General
