Doing more with your camera
www.kodak.com/go/support
45
Using exposure compensation with exposure bracketing
In P/M modes, you can use exposure compensation (see page 14) in conjunction with
exposure bracketing (see page 38) to get the best exposure.
Changing P or M mode settings
P/M modes control ISO, Focus, exposure compensation, shutter speed, and aperture
(f-number, also known as f-stop). Use the Menu button to control all other settings.
1 Turn the Mode dial to P/M.
The mode options are displayed.
If the exposure
compensation is
set to:
And if the exposure bracketing
interval is set to 0.3 steps:
Then the exposures
taken are:
0.0
+1.0
–1.0
Set the Exposure bracketing in the
Capture menu (see page 38).
–0.3, 0.0, +0.3
+0.7, +1.0, +1.3
–1.3, –1.0, –0.7
Aperture
Shutter speed
Exposure compensation
White—selectable
Grey—non-selectable
Yellow—changeable value
Red—out of range
ISO speed
P/M Options
Focus mode
Mode
To Next Page
Loading...
Need help?
General
