Scanning
38 www.kodak.com/go/aiosupport
Scanning from the control panel
To scan a document or a picture from the control panel:
1. Lift the scanner lid, and place the original document or picture face down in the
right-front corner of the scanner glass.
2. Close the lid.
3. Press Home.
4. Press to select Scan, then press OK.
The Scan Options menu appears on the LCD.
5. Press to select an option, then press or to change the setting.
Scan Option Settings Description
Scan To USB computer
(default)
The scanned file is sent to the
USB-connected computer.
Name of computer
(only if a computer is
connected by
wireless network)
The scanned file is sent to the
computer on the wireless or Ethernet
network.
Memory Card The scanned file is sent to the
memory card in the memory card slot
To Next Page
Loading...
