Networking Your Printer
16 www.kodak.com/go/aiosupport
Adding a wireless network connection to a USB-connected computer
You can change the way you connect to your printer at any time.
Changing from USB to a wireless connection
To change the printer connection type from USB to a wireless (Wi-Fi) network:
If your printer is connected to a computer with WINDOWS OS:
1. Disconnect the USB cable from your printer and computer.
2. If you have not already done so, connect your printer to your wireless network.
See Connecting to a wireless network, page 9.
3. On your computer, disable any firewall you have installed until you have
successfully completed the installation.
4. Select
Start > All Programs > Kodak > KODAK Printer Setup Utility.
• If your wireless printer (example: Kodak HERO 4.2+XXXX)
is not listed:
a. Select
No, my printer is not listed, then click Next.
b.Select your printer from the list, then click
Next.
c. Select
Network - Wireless/Wi-Fi, then click Next.
When your printer is detected, driver installation begins.
d.When driver installation is complete, click
Done.
• If your wireless printer (example: Kodak HERO 4.2+XXXX)
is listed:
a. Select the printer that is connected to your network.
b. Select
Yes, my printer is listed, then click Next.
The printer with a wireless connection is listed as the name of the printer plus a
number (for example, Kodak HERO 4.2+XXXX).
If your printer is connected to a computer with MAC OS:
1. Disconnect the USB cable from your printer and computer.
2. If you have not already done so, connect your printer to your wireless network.
See Connecting to a wireless network, page 9.
3. Select
Apple > System Preferences.
4. Under Hardware, select
Print & Fax or Print & Scan.
5. Click
+ in the dialog box.
6. Select your printer from the list.
7. Click
Add, if required.
The printer with a wireless connection is listed as the name of the printer plus a
number (for example, Kodak HERO 4.2+XXXX).
To Next Page
Loading...
