www.kodak.com/go/aiosupport 79
KODAK HERO 4.2 All-in-One Printer
Scanning to a memory card
1. Insert the memory card into the memory card slot on the printer.
2. Lift the scanner lid, and place the original face down in the right-front corner of
the scanner glass, then close the lid.
3. Close the lid.
4. Press .
5. Touch
Scan.
6. Touch
Memory Card, then touch the setting/option you want to change.
Scan Option Settings Description
Scan What Photo
(default)
Sets the scan settings for scanning a picture
(see Changing the scan settings for scanning
from the control panel, page 73).
Document
Sets the scan settings for scanning a document
(see Changing the scan settings for scanning
from the control panel, page 73).
File Type JPG (default) The scanned file is saved as a JPG.
Single-page PDF The scanned file is saved as a single-page PDF.
Multi-page PDF The scanned file is saved as a multiple-page
PDF.
To Next Page
Loading...
